Blue Jean Planter

Now that the holidays are over, our bay window area is looking a little sparse. I’m starting to crave spring and while we’re still a long way off, a little more greenery indoors can’t hurt in the meantime!

Standing planter 020_bof.jpg

Today I’m demonstrating an adorable plant stand that literally stands and is easy to make if you follow my step-by-step tutorial. All it takes is a pair of blue jeans, scrap wood and few other things from your local second hand shop. You can probably upcycle things you already own for free!

This project was inspired by my husband who made the first one out of his jeans and boots after he left the construction industry (which you’ll see at the end of this post). I thought the planter was so much fun that I’ve been making them occasionally as gifts ever since. Although the one I’m demonstrating for this tutorial is just a small tyke, you can make this planter in any size you desire! I got my clothing at my local Value Village; it’s a great resource if you want to start small and don’t have young kids that have outgrown their stuff.

This YouTube video gives you a quick overview.

To start, you’ll need (in no particular order):

materials-1

  • blue jeans (I got my supplies at Value Village)
  • a pair of shoes (high top sneakers or short boots are best)
  • oval container (it can be plastic or metal; the shape is more important)
  • 2×3’s or 2×4’s used for wood studs
  • scrap piece of 1/4″ – 5/8″ plywood
  • Wood countersink head screws (at least 1 1/2″ long for this project and longer if you use taller jeans)
  • two plastic veggie bags (recycled from the grocery store)
  • panty hose (a great opportunity to upcycle the ones with runs in them)
  • pool noodle (you can substitute soft foam or batting)
  • quick set cement (I used the kind for setting posts that sets in 10 minutes)
  • paint stick (for mixing)
  • tape (painters and/or packing tape)
  • belt (optional)
  • recycled plastic container (to mix the cement)
  • cotton batting

Measure the jeans from the hem to just above the crotch area and add some additional height for the shoes (my measurement was 14 1/2″). Cut two 2×3’s to the length you measured.

Materials 4.jpg

Drill through the centre of one end using a drill bit that’s big enough to accommodate the width of the wood screw.

Materials 7_bof.jpg

Draw an oval shape on the piece of board and cut it out with a jigsaw or band saw. Since this project is small and the planter won’t be too heavy, I’ve used 1/4″ plywood but you’ll want a heavier piece for bigger projects that are going to be loaded up with plants.

Jeans Planter_2_BOF.jpg

Place the wood studs into each shoe and set the oval on top to determine the spacing of the legs. Drill two holes into the oval platform (mine were 3 3/4″ apart).

Materials 6_bof.jpg

Attach the oval platform to the wood studs. Countersink the screws slightly into the platform so they won’t stick out and interfere with the planter once it’s sitting on top.

Jean Planter_5_bof.jpg

Next, cut a pool noodle in half. I used it because I had it, but soft foam or batting will also work for this next step too.

Standing planter 009_bof.jpg

Tape one half  of the noodle to the flat end of each stud (this will be the front).

Standing planter 10_bof.jpg

As I mentioned, you can substitute soft foam or even cut some pieces of batting from an old duvet to wrap the legs. If you’re using softer material, I usually staple it on and also cover it in a nylon stocking to keep it all in place. In this instance I could have added some more packing tape; I didn’t really need the stocking but I wanted to demonstrate it as an option to keep things from shifting.

Standing planter 12_bof.jpg

Now you’re ready to put it all together, but before you do, unlace the top of the shoes to expose the interior and insert two plastic bags; the kind used to hold your veggies at the grocery store. Sometimes I don’t add the plastic if the shoe or boot is made of heavy duty leather, but since I’m working with a relatively porous fabric the plastic will prevent the water in the cement mix from soaking through.

The cement stabilizes and weighs down the planter to keep it from tipping over. Pour some water into a recycled plastic container, add the cement and mix thoroughly with an old paint stick.

Standing planter 13_bof.jpg

To prop up the legs in the shoes before I poured, I temporarily added in a scrap piece of wood and a small screwdriver at the heel; just be sure to remove your items before you pour the cement! Pour cement into each shoe.

Standing planter 15_bof.jpg

Tamp the mixture down with the paint stick to make sure it’s evenly distributed all around the posts.

Standing planter 13_bof.jpg

Once the shoes are full and before the cement is dry, lift up the tongues, lace the shoes up and tie them up so the cement can finish setting.  You can also cut back the plastic bags that extends above the top of the shoes.

Standing planter 20_bof.jpg

Once the cement is fully set, remove the oval piece of wood temporarily.

Standing planter 19_bof.jpg

Add the pants onto the legs, then reattach the wooden oval platform.

Standing planter 22_bof.jpg

As I was screwing the right leg back on, I decided to swing the foot out a little to strike a more casual pose. Pull the pants up and insert the planter so it sits on top of the wood platform. If this pair of jeans didn’t already have a snug waste band, I would typically add a belt at this point to tighten the jeans around the planter so it doesn’t shift. You could glue the planter to the platform if you wanted it to be permanent, but I like the option of being able to remove it if I want to switch out the plant materials in it.

Standing planter 23_bof.jpg

The back end will look a little saggy so I filled it out by stuffing some cotton batting into the area between the planter and the seat of the pants.

Standing planter 007_bof.jpg

Standing planter 011_bof.jpg

Here it is from the front before I added the plant:

Standing planter 004_bof.jpg

It’s all done after you add the plant material! All the garden stores in our immediate area are closed so I picked up an arrangement at our local flower shop for the reveal. The container was bigger than I would have liked, but it does the trick!

Here she is all decked out with her greenery!

Standing planter 087_bof.jpg

I think the small ones are SO adorable but my favourite has got to be the pair of bride and groom planters I made for our wedding to adorn either side of the aisle at our venue!

Wedding Planters_106_Birdz of a Feather.jpg

Here’s another an example of a full sized planter we’ve done in the past as a birthday gift for our niece:

IMG_4299_bof.jpg

And here’s a final reveal showing a few different sizes of plant stands gathered together. We’re growing some basil in the middle one!

Standing planter 095_bof.jpg

With the larger ones, it’s fun to add accessories like this bottle opener/key chain and belt:

Standing planter 099_bof.jpg

The only thing that would improve on this project would be if it could walk itself to the sink to get a drink of water, but that may be a little beyond our skillset 🙂

If you liked this post, please pin and share! This is my first official full craft post in my new craft studio (which I kicked off last year half way through this dog bone gift basket) and there’s plenty more ahead in 2017!

dog-bone-basket-036_bof

My next craft post will be a fun indoor water feature with step-by-step instructions that you won’t want to miss! Follow us right here on Birdz of a Feather (link in footer or on homepage) or Bloglovin (link below) and you’ll get an e-mail next time I post a new craft project.

Bloglovin Button

Featured on Hometalk.com

Save

Save

Save

Save

This Is How We Roll Thursday Party

Save

Organize a Craft Room

Today marks the launch of my new craft site Birdz of a Feather Craft! I’ll still post our home reno projects at Birdz of a Feather Home so if  you’re interested in renos, be sure to follow me there too!

Since finishing off my craft studio at the end of last year, I’m spending more time on craft projects. To kick off my new focus for 2017, (and celebrate my new craft studio) I thought I would dedicate this first post to craft room organization.

Studio Update 187.jpg

Hubs built an entire wall of storage cabinets for me using Ikea Pax units. Although they’re meant to be used in the bedroom as a wardrobe, the interior options are ideal for a craft studio. I’ve used the interior organizers to full advantage. Here, we’ve installed a pull-out shelf to store one of my sewing machines:

Ikea for the Studio 428_bof.jpg

I put a few felt dividers into one of the drawers to corral small items such as my pressing hams:

Ikea for the Studio 531_bof.jpg

There’s a ton of room to store both my hanging and tissue patterns, my glass grinder, my tools and even my thread (although I changed my mind about the tread as you’ll see further on).

The clear glass drawer fronts allow me to see everything I have in an instant!

ikea-for-the-studio-651_bof

There’s a flat storage space for my self-healing cutting mats and all of my tools are stored on pull out shelves so they are readily accessible. It’s impossible to loose anything when you can simply pull out a drawer to see what you have! The only trick to keeping it organized is making sure to return everything back to where I got it; so far it’s worked like a charm.

ikea-for-the-studio-667_bof

I even have a few pullouts to store some closed storage bins:

Ikea for the Studio 520_bof.jpg

Instead of hiding my cone threads and yarns in the cabinet, I decided to relocate them to display them in all their glorious colour. The vintage glass oak display cabinet keeps the dust off everything.

The 6-drawer card catalogue resting on top of the cabinet adds additional closed storage. I organized things like tape and fasteners in the drawers.

Studio Update 234_bof.jpg

To organize my collection of vintage irons and other cast iron objects, I’ve displayed them on an Ikea Lack shelf. I love being reminded of how far technology has come in the last century.

Studio Update 192.jpg

I couldn’t believe it when we found the shabby chic highboy shown below on the side of the road. It was missing its drawers, but it turned out to be perfect to tuck away larger project components so I can clear my work table when I have things in progress and need to move on to another step. It’s so easy to store and grab things from the open shelf space.

My grandmother bought me the industrial pattern table to christen my first studio. Hubs added a shelf onto the bottom of it so I could store some closed bins that are holding my fabrics. My grandmother (and Mom) taught me most of what I know about crafting and I always think of her when I’m looking for some inspiration for my next project!

Studio Update 168_bof.jpg

My favourite piece (if I had to pick just one) is the kitchen drawer units we repurposed from our kitchen renovation. We faced the front of each drawer with MDF to get a clean slate. I blew up a picture of a VW beetle that hubs restored and attached it to the MDF for a unique storage piece.

Studio Update_cabinets 066_bof.jpg

There are six large and deep storage drawers as well as a vertical pullout (similar to the pull-out cabinet we built for our new kitchen). I store most of my finished projects in the drawers that are still waiting for their final place in our home (or someone else’s home!).

Studio Update 162_bof.jpg

In one half of the pull-out cabinet I’m storing mostly liquid items such as paint, caulk and glue. The shelves are adjustable so that my storage options are totally flexible and I can switch things around whenever I want to:

img_5084_bof

On the other side of the divide, we installed a perforated metal backer. I can hang some items on the metal,  either peg-board style or by magnets. I haven’t organized this spot yet, but will likely store my rulers here.

IMG_5085_bof.jpg

My work area will one day hold a laptop or desktop computer so I can design and execute in the same space.

Above the floating desk, we installed additional wall cabinets to maximize storage space.

IMG_5091_bof.jpg

I’ve got inspirational magazines stored in one of the cabinets, as shown below, and a collection of craft books in the other units:

IMG_5093_bof.jpg

Lastly, I’ve organized all my smaller items in a vintage card catalogue. Everything is labeled alphabetically so I can easily find it:

IMG_5081_bof.jpg

Studio Update 157_bof.jpg

Now that everything is coming together organization-wise, I can fully concentrate on the fun aspects of my new craft studio: creating and making things!

Here is a sneak peak of my very first craft project in 2017. I’ll be showing you how to make your very own blue jean planter. Isn’t it adorable? I’ll have a full tutorial, and hopefully a video for you, very soon!

standing-planter-087_bof

Don’t forget to follow me here on Birdz of a Feather Craft to get an e-mail to notify you each time I post or on Bloglovin’ if you want the full tutorial once it’s hot off the press!

Bloglovin Button

Featured on Hometalk.com

Save

Save

Save

Dog Toy Organizer / Gift Basket

Dog toys have a way of getting scattered throughout the house just like kids toys do. Make this dog bone basket for yourself to organize your dog toys in when you’re in the mood to tidy up or make it for any dog lover on your gift list; it also makes a great gift basket!

Dog Bone Basket 036_bof.jpg

Just about all the materials we used to make our dog bone basket are either repurposed from items we had on hand (like the scrap of MDF we used for the base and door pulls we made into basket handles) or came from the dollar store. It’s not only unique, but it’s budget friendly too!

I started by drawing out the bone shape on paper. By folding the paper in half and only drawing out half the bone, you’ll get a more even shape once it’s cut out. I taped the paper pattern to a scrap piece of MDF and cut around it with a jigsaw. I rounded the top edges perimeter with sandpaper to smooth the sharp edges and then painted it white.

I marked the holes at 1/2″ increments about ½” in from the edge. Hubs drilled out the holes with a drill press so I could insert wooden dowels into the holes. Using a drill press is a real time saver and each hole can be drilled to the same depth for consistency. The dowels act as the ‘ribs’ of the basket to support the weaving.

IMG_3534_bof.jpg

I dabbed one end of each dowel into a bit of glue before inserting them into the holes.

IMG_3535_bof.jpg

Once all the dowels were glued, I let it dry 24 hours. Then it’s time to start weaving!

IMG_3541_bof.jpg

I made this basket for our friend’s new dog, which is tan and black, so I thought I’d match up the colour of the basket by combining the dollar store twine with some black yarn I had leftover from a knitting project.

IMG_3548_bof.jpg

Tie a knot and attach the combined twine and yarn to the middle dowel at one end of the bone.

IMG_3550_bof.jpg

Begin weaving in and out around the entire shape.

IMG_3551_bof.jpg

When I got back to where I started, I continued in the same direction. Note that if you have an odd number of dowels, you’ll be able to keep going around and around.

However, if you end up with an even amount of dowels, you’ll have to double back and turn around when you reach where you started. Have a look at the plant basket below that I made previously to see how to ‘double back’.  You can see that towards the top, I looped around both dowels just to stabilize and hold the corner together.

hometalk-hq-challenge-237_bof

Our friend named the new pup Dot, so I added a charm with the letter ‘D’ to the centre of the basket on the front. I opened up the link using two needle nose pliers and then squeezed it closed again around the twine and continued weaving.

IMG_3566_bof.jpg

When you’re about an inch from the top of the dowels and you’re back to where you started, bring the end of the twine to the inside of the basket, but don’t cut it off. To finish off the top and create a nice edging, use a thicker piece of rope: fold it in half and loop it around the same dowel.

Dog Bone Basket 004_bof.jpg

Crisscross the rope around the dowels all the way around the perimeter of the bone until you’re back at the beginning again.

Dog Bone Basket 006_bof.jpg

To end the edging, bring both pieces of rope to the inside of the basket. You’ll use the end of the twine to wrap around the rope and finish it off.

Dog Bone Basket 014_bof.jpg

Wrap the twine around the rope ends in a figure eight until it’s the length of the inside wall of the basket.

Dog Bone Basket 020_bof.jpg

Knot the twine and add some hot glue to secure the end to the back of the rope where it won’t be seen. Cut the end of the twine and the rope, then use hot glue to secure the rope to the inside of the basket so it blends in seamlessly. You can glue down the edge of the rope as well as putting a dollop on the base of the basket to keep the ends from lifting.

Dog Bone Basket 024_bof.jpg

To finish off the top of the dowels, I blackened the ends with black marker then glued on some wooden beads.

dog-bone-basket-029_bof

The holes in the dollar store beads tend to be very inconsistent so I used my thin needle nose pliers to ream out the holes, making sure they would fit onto each dowel before I glued them in place. If you want to be picky about it, you can use a tiny wire brush to clear any debris from the holes before gluing on the beads.

Dog Bone Basket 030_bof.jpg

I added a dab of hot glue to the underside of a bead and then threaded it onto the dowel, continuing around until all the dowels were capped.

Dog Bone Basket 026_bof.jpg

In the planter basket I showed you above, I incorporated rope handles into that one so it could be lifted. Since this basket is much larger and heavier, I decided to repurpose some door pulls instead. They were originally saved from our old cabinets and were yellow oak with gold metal.

Dog Bone Basket 060_bof.jpg

I painted them up to coordinate with the charm (I painted the oak black, then silver leafed and distressed the metal with more black). Hubs gave them a quick spray coat of varnish in the garage, which we let dry, before I mounted them onto the basket.

Dog Bone Basket 008_bof.jpg

Measure to get both handles evenly positioned on each side the basket, ensuring you don’t cover up the charm on the front! You can insert toothpicks where you want the screws placed. I used some washers on the inside of the basket before feeding the screws through the weave of the basket. Use the toothpicks or thin needle nosed pliers to guide the screws through the weave and position the handles on each side. You’ll need a short screwdriver to attach the screws to the handles as the width is pretty narrow in the centre.

Dog Bone Basket 047_bof.jpg

As a last step, shave off some of the longer sisal strands with scissors to neaten it up.

Dog Bone Basket 033_bof.jpg

The basket is now done and ready to fill with dog treats – and of course a flea and tick collar to protect the pup and keep her safe!

Dog Bone Basket 048_bof.jpg

We inserted a card and then wrapped it all up with some cellophane.

Dog Bone Basket 058_bof.jpg

For one more easy to do gift basket, and other crafty DIY gift ideas, check out the following posts by clicking on the pictures below:
hometalk-hq-challenge-308_bof

Collage_First 3 HQ Challenge Projects

hometalk-hq-challenge-327_bof

You may not have noticed, but halfway through this project, I went from working on my dining room table to my own craft studio – courtesy of all the hard work hubs put into finishing off our basement! I’m so excited to finally have a dedicated place in the house to repurpose and craft to my heart’s desire. My new studio boasts a focal point made of repurposed kitchen cabinets to hide away my stash! Check out the reveal of my new studio!

final-cabinets-002_bof

If you enjoyed this project, please pin and post on Facebook! And don’t forget to follow me here on Birdz of a Feather Craft (link on homepage) or Bloglovin’ (link below)!

Bloglovin Button

Featured on Hometalk.com

Save

Save

Save

Save

Muskoka Chair Challenge at the Ontario Science Centre

Who doesn’t love to relax in a Muskoka chair (or Adirondack chair as our neighbours to the south call it)!  Several years ago, the Ontario Science Centre (OSC) sponsored a challenge asking for willing participants to create a unique Muskoka chair that would appeal to their visitors during the summer months.

OSC aims to inspire a lifelong journey of curiosity, discovery and action to create a better future for the planet. But all that is rounded out by a downright fun experience when you visit! Hubs and I have racked up so many great and memorable experiences each time we go, that we jumped at the chance to team up and give the chair challenge a go.  We had a blast lending our creative talent to designing one of the chairs that would ultimately be displayed around the grounds at OSC!

Adirondack Chair_1_bof.jpg

A science connection was naturally something to consider, however it also needed to be comfortable to sit in, withstand the elements that an outdoor chair would be exposed to and withstand the attention and affection (aka wear and tear) that their visitors would bestow upon it!

Each team was given a dissembled chair in a box, and the rest was up to us. We started by sanding all the pieces of wood that made up the chair.

Adirondack Chair in Progress 2 157_bof.jpg

Rather than do the obvious thing and incorporate a science theme, I decided to take a different approach to the challenge; one that no one else would think of.  I found out a long time ago through a friend, and many visitors are probably unaware of this, but did you know that all the exhibits at OSC are conceived, designed, built and finished right on-site by OSC staff?  Yes indeed, it takes the collaboration of many people to create the interesting, informative and interactive exhibits that are on display — and they do it in a way that is as green as possible!

Armed with this knowledge, I wanted our Muskoka chair to pay tribute to some of the people who are ‘behind the scenes’ in Exhibit Fabrication: namely the designers, wood workers and finishers.

Since every good concept must start with a plan, I knew that part of developing great experiences for their visitors would start with a ‘blueprint’ and hoped there would be extras hanging around and gathering dust. Why not découpage some of these to our chair?  By recycling them, we could pay homage to all the exhibit fabricators while being environmentally friendly.  I guess you could say that we turned blueprints ‘green’!

I was able to secure extra blueprint copies of the Living Earth exhibit –  a fitting theme as every element we used was recycled and/or earth friendly.

I lined up all the slats, and positioned  the blue prints over them so they would all read perfectly once assembled.  When I was happy with the layout, I ran the side of a pencil around each outline to ‘score it’ so I could faintly see where to cut each piece. I didn’t use the pencil lead because I didn’t want to erase any remaining marks after they were cut, but  I did use it to lightly number the back of the paper and corresponding wood so the order wouldn’t get mixed up. Then I glued the blueprints to the wood using a 1:2 mixture of water and glue to thin it out. When all the slats were finished I moved onto the arms (seen below):

Adirondack Chair in Progress 3 003_bof.jpg

Because of the size of the chair, I had to overlap several blueprints.  By laying it all out first to visualize it, I was able to come up with an interesting idea for the back of the chair! I found that one of the blueprints in the set had a circular pattern rendered on it. It turned on a lightbulb: why don’t we incorporate the Science Centre logo into the design in recognition of the graphics department?

Ontario_Science_Centre_Logo.svg.png

I love that OSC’s logo connects in such a way that it forms a trillium: the provincial flower of Ontario since 1937!

When it came to fabricating the logo, I didn’t want to completely mask the beauty of the blueprints (I also wanted to create a peek-a-boo effect with the trillium) so I came up with the idea of cutting out the circles from recycled coloured tissue paper.  When découpaged over the blueprint you could still make out the details through the tissue and once sprayed with a clear finish it was even better; it worked like a charm!

Adirondack Chair in Progress 3 009_bof.jpg

Tissue paper OSC logo superimposed onto bluepint

Next, we upcycled an old wooden shipping pallet and brought it to life as a footstool and cup holder to accompany our chair (an ode to OSC wood workers). Each piece was sanded smooth, as we did with the chair, to better accept the découpage treatment.

SONY DSC

Salvaged shipping pallet turned into slats and sides for footstool

I wanted each slat of our footstool to be representative of some of OSC’s exhibit halls – to tie in the displays that at one time all started out as blueprints! I used one blueprint and overprinted it with seven of the exhibit hall names.  Since the width of the footstool was wider than I was able to print, I added in the red, blue and green tissue paper once again to make up the width.

The project took up space on our dining room table and hubs’ workship for several weeks, but it was well worth it because we had so much fun while we worked on it together!

Adirondack Chair in Progress 003.JPG

Footstool slats made from an upcycled shipping pallet

Adirondack Chair in Progress 014_bof.jpg

Creating the pattern for the cup holder

Hubs glued and clamped together two pieces of the pallet to gain enough width for the top of the cup holder, then cut out the shape with a jigsaw.

Adirondack Chair in Progress 3 004_bof.jpg

The finished cup holder came together nicely; who would’ve guessed it was made from a pallet?

Adirondack Chair in Progress 2 109_bof.jpg

We wanted a pop of colour to tie the cup holder into the OSC logo. Hubs tested a few stains and ended up choosing a red dye for the accent colour.

Our chair, footstool and cup holder were protected from the elements with water based varnish and dye, reducing the emission of Volatile Organic Compounds (VoCs) into the air  – and recognizing the contribution of OSC’s finishing department.

Adirondack Chair in Progress 3 039_bof_fin.jpg

We sprayed all the pieces individually  and then screwed the whole chair together. Next, we assembled the footstool and mounted the cup holder we fashioned from the pallet.

Before we gathered in a room at the Science Centre for the throwdown,  hubs made a last minute purchase in the gift shop. He found a coin bank in the shape of a can with OSC’s logo on it and purchased it to top off the cup holder as a final touch.

Adirondack Chair_FINAL 187_BOF.jpg

All the submissions were fascinating as you’ll see below. We placed second and all the chairs were put out on display where visitors to OSC could admire and enjoy them!  Many years have passed since this challenge though, so I don’t know if any of these chairs are still on display.

Adirondack Chair in Progress 2 210_bof_fin.jpg

The winning chair was this Breathe Look Dream chair which featured a living roof!  It was stained using elements such as grass, steel wool, carrots, tea, turmeric etc., combined with vinegar and seeped in a mason jar. The canopy used birch wood felled in the ice storm and wood framing from a demolished deck. The plant trays used in the green roof were left over from annuals planted by City of Toronto workers.  Best of all, the plant materials in the gutters of the chair were curated to repel mosquitoes: Basil, Rosemary, Citronella, Bee Balm, Marigold, Lavendar and Catmint.

Adirondack Chair in Progress 2 228_1st prize_bof.jpg

The Tensegri Chair boasted a halo water misting unit and a human powered cooling fan (using a crank on the chair arm); all welcome features for those hot and humid Toronto summer days!

Adirondack Chair in Progress 2 172_bof.jpg

Another cooling apparatus chair had a drink cooler and an adjustable canopy shaped like a leaf; it was a real head turner!

Adirondack Chair in Progress 2 218_bof.jpg

Here’s the Solarific chair – which protects from the sun and harnesses its energy too. Along with the solar lights, the pencils decorating the arms absorb the solar rays to produce a glow-in-the-dark effect at night.

Adirondack Chair in Progress 2 225_bof.jpg

I loved the message on the seat marked by the words “Your Curious Belongs Here” (an OSC motto). Cute!

Adirondack Chair in Progress 2 180_bof.jpg

The OSC Camp chair sings the praises of summer day camp. OSC  has been keeping young minds happy and active in the summer with a week of interactive discovery where kids can make new friends, take part in exciting experiments and embark on unforgettable science adventures! I wish I could’ve gone there when I was a kid!

Adirondack Chair in Progress 2 221_bof.jpg

In retrospect, the only thing I would do differently is to spray a few more layers of topcoat onto the entire chair. The trick to making this endure the elements better is in spraying many light coats of water-based varnish to seal in the paper and keep it from lifting. Unfortunately we ran out of time before we could build up the topcoat, so it did suffer a bit once it was put on display.  If I were to create a découpage chair for my own home, I would situate it outside where it wouldn’t be directly exposed to the elements – like a 3-season porch or under an awning.

One day when I get around to making a chair for our own use at home, I think it would be fun to incorporate something personal to us. I would enlarge either a layout of our own house, a satellite view of our street or even an vintage map of our neighbourhood for the découpage element. Maybe I’d even use my Birdz of a Feather logo as the tissue paper element on the back of the chair 🙂

BOF Logo Only_fin.jpg

Although these chairs were designed specifically for the Ontario Science Centre, you could easily adopt some of these ideas to make a chair for your own home; the ideas are endless!

Speaking of endless, there’s a huge variety of experiences for every age to take in at OSC; it is more than a great place for kids! If you’re ever in the Toronto area (or just haven’t visited for a while), you should definitely  check out what’s on at the Ontario Science Centre and drop in! I know that Hubs and I are due for a visit soon 🙂

Follow me here on Birdz of a Feather Craft (link in footer or top of homepage) or Bloglovin’ (link below)!

Bloglovin Button

 

Key Organizer

My husband is always misplacing his car keys which often makes us late. It’s been a source of frustration for me – wasted time spent looking for keys when we should be out the door.

As a solution, I made a transportation-themed key holder featuring a VW bug cut from a vinyl record album!

VW Key Holder 007_BOF.jpg

I found some inspiring ideas on what to do with scratched record albums on Pinterest (search vinyl record art and you’ll see loads of ideas). Given my husband’s love of all things Volkswagen, I thought it would be a fun challenge to try out a VW Beetle with its curvy iconic shape. I cut the Beetle out of the vinyl record, mounted it to a backer board and added in other elements such as copper foil, fused glass, war amp key tags and even a popsicle stick!

If you don’t have a scratched album – or still love to listen to yours – check out a local second hand store. The Juice Newton record I used was found at my local Value Village for only $1 – ironic because one of hub’s friends from his beer brewing days nicknamed him ‘Juice’. Once all the elements were cut away, you can still see ‘Juice’ on the album🙂

Here are the items I used to create the key holder (I forgot to add in the double face tape!):

VW Key Holder 013_BOF_FIN2.jpg

I used Google images to find some clipart of a Volkswagen Beetle that I thought would work. I intended to create an older version of the VW for hubs, but the one I used for the key holder pictured above was so stylized that I knew it would be perfect to use as a test run. I didn’t really expect it to come out so good on my first try, so I never ended up doing the second one as I originally intended!

If you’re interested in trying out this project, I’ve included jpeg files of the beetle and stoplight clipart that I used below. Since the  record album was 12″ wide, I brought the graphic into  Powerpoint and set it to print on legal sized paper.  I then enlarged the clipart to 12″ in width so it would span the entire vinyl album. As you can see by my finished key holder in the opening picture, I used a mirror image of the clipart shown below.

Key Holder 2

I used the stoplight to make the copper foil accent using a sheet of copper (see the jpeg provided below).

stoplight.jpg

I marked around the outline and cut it out of the copper sheet. Then I put the piece over a rubber pad and used various embossing tools to score the lines and emboss the detail. Some elements I embossed on the front of the copper and others I did on the back.  For instance, the centre (where the red, yellow and green ‘lights’ are) was embossed into the rubber pad from the front so the detail would look concave. The ‘wings’ of the piece are embossed on the back so that they stand proud and give the piece dimension.

VW Key Holder 010_bof.jpg

To finish off the stoplight I cut some circles out of adhesive backed black vinyl, stuck on red, yellow and green dots in the centre, and adhered them onto the copper.  I could have used some gem stones or even glass globs instead, but the stickers were lighter and I had them on-hand in my stash.

I cut out all the white areas of my VW  Beetle paper pattern, positioned it over the record album and used a chalk sewing pencil to transfer the design onto the vinyl. After Googling how to cut vinyl records, I settled on using a hot knife blade that came with a wood burning set I bought at Michaels. Here’s a link to the one video I found on YouTube that helped me immensely in the how-to aspects of cutting vinyl records:  https://www.youtube.com/watch?v=CHH47OVAKhw. Notice in particular at .47 seconds where she shows how she cuts the vinyl: she keeps her knife steady in one hand and then rotates the work with her other hand.

I set up a fan to blow away the fumes, but it would probably be best to also use a respirator, or do it outdoors if possible, to avoid inhaling the fumes.

I placed a piece of plywood underneath the album so I wouldn’t burn my work table.  Once the knife was heated up, I lowered the point into the vinyl on one of the lines, then used my left hand to rotate the album as I kept the knife steady in one spot and pulled the work toward me.  I worked slowly and steadily to slice through the vinyl with the hot knife, taking care not to stay in any one spot too long and over melt the vinyl. When necessary, I turned the work so I could cut into any corners.

In addition to the vinyl record, I added in a few odds and ends left over from another VW-related item I made for hubs before we were married – the stained glass clock pictured below. What started out as a birthday present took me all the way until Christmas to complete! Since it took so much effort to fabricate, I wanted to use elements I had already created!

DIY 015_bof.jpg

At this point, I gathered all  my components and started to visualize how they should all come together so I could plan the layout for the backer board.  I found a few war amp key tags in my father’s junk drawer; I thought they’d make a great backer for the cup hooks to hang the keys!

VW Key Holder 019_bof.jpg

DIY 007_fin_bof.jpg

For the backer board, I cut a piece of MDF to the shape of a house then painted it with some white paint on the front and sides:

MDF Board_BOF.jpg

To hang the board on a wall, I glued and screwed a keyhole hanger to the back of the board to make it secure. Make sure to put it on as shown below with the wide end of the keyhole pointing down or it will fall off the wall when you hang it up. Centre it on the board (you can see my pencil marks below).  It should also run perfectly straight up and down to help keep it level once hung.

VW Key Holder 021_bof.jpg

I also added 3 felt pads on the back of the board to buffer the wall:

VW Key Holder 020_BOF.jpg

In between the two key hooks, I added a ‘fake’ keychain made from fused glass, ball chain and a key blank. We only needed two hooks for hubs and me so I thought it would be interesting to add this purely decorative piece.

It’s a bit hard to make out, but there is a VW logo inscribed onto the copper that’s fused into the glass. This was the spare piece that I remade for hub’s glass clock because I didn’t like the air bubbles that got trapped between the layers – but I learned to embrace them for the key holder🙂

VW Key Holder 004_BOF.jpg

To finish off the car, I put a popsicle stick behind the space I cut away from the vinyl record for the ‘license plate’. I traced the shape of the license plate onto stick then burned around the outline and added 66 VW to the centre of the wood with a wood burning tool (using a narrow tip).  I cut around the outside of the burned edges with an exacto knife and sanded the edges smooth. It was such a tight fit that I didn’t have to glue it into the space; it just stayed put on its own.  However, you could add some hot glue around the edges on back of the record to keep it from popping out.

VW Key Holder 009_bof.jpg

Hub’s favourite year of beetle is 1966; which I guess would have worked better with an older style bug – oh well!  This is the  old style of VW my husband prefers:

VW Clipart_old bug

I used some double side tape to attach the vinyl record and the copper stop light to the board.

Position the war amp key tags where you want them (in my case, on either end of the board underneath the VW bug) and screw the cup hook in tightly so they end up pointing upwards.

VW Key Holder 018_bof.jpg

VW Key Holder 002_BOF.jpg

To finish it off  I attached the glass key chain with velcro.

VW Key Holder 006_BOF.jpg

The key holder was ready to go into active duty, however, I never could convince hubs to use it.  It’s been languishing in a box for quite some time. I’ll likely drag it out again when hubs has finished my craft studio and find a place (and some other purpose) for it there; let me know if you have any suggestions🙂

At Birdz of a Feather, we’re feathering the nest… one room (and project) at a time. If this project has inspired you, please pin and share on Facebook.

VW Key Holder 008_bof

Now that the weather is beautiful, it’s time for outdoor pursuits and gardening! If you plan on attending any flea markets or yard sales this summer, be prepared by checking out my post for the DIY Flea Market Survival Kit shown below:
C_Opening Flea Market Survival Kit.jpg

Follow me here on Birdz of a Feather Craft (link in footer or top of homepage) or Bloglovin’ (link below)!

Bloglovin Button

Featured on Hometalk.com